What if your Lenovo ideapad 330s-15kb charging stops at 60%?

Method One

Many systems support power management programs that can either extend the run time of the battery or extend the life of the battery. The 60% available (plugged in, not charging) message indicates that this sort of setting may be enabled. Under this setting, the battery does not charge to 100% when connected to an AC adapter in order to preserve the battery’s life.


Method Two

    Go to Lenovo support website to download and install the latest BIOS. Reboot the PC and try again. If the problem persists, go to the next step.
    Shut down the computer.
    With the battery in (remove the AC adapter), attempt to turn on the computer by holding down the power button for 30 seconds. This should not turn on the computer.
    Remove the battery (if the battery is not detachable, skip this step).
    Again, attempt to turn on the computer (AC adapter is not plugged in) by holding down the power button for 30 seconds. This should not turn on the computer either.
    Re-attach the battery, plug in the AC adapter, and turn on the computer. The battery should begin charging.

There are other possible causes for plugged in/not charging conditions. Please refer to Related Articles for more scenarios or contact the Lenovo local service provider by clicking Contact US from the top on this page.

The above sources from official manual. 

If you are considering to replace the Lenovo ideapad 330s-15kb battery,we have the original battery in stock. Please feel free to check more here: Köpa helt nya lenovo 2icp6/54/90 batteri, 7.4V 4050mAh 30Wh original laptop batterier